Hydraulics
Hydraulic Hoses & Fittings
- Standards
- EN 853 1SN / 2SN, EN 856 4SP / 4SH / R12 / R15, SAE 100R series
- High-Pressure Hoses
- Low-Pressure Hoses
- PTFE Hoses
- Thermoplastic Hoses
Industry
Oil, Gas & Petrochemicals
High-pressure fluid lines, harsh-duty filtration and traceable spares for upstream, midstream and refinery operations.
Overview
Oil, gas and petrochemical sites combine high pressure, sustained heat and abrasive dust, and most of them run strict documentation and site-entry requirements. We prepare certificates and documentation in advance so that delivery is not held at the gate.
Typical applications
- 4SP / 4SH multi-spiral hose on rig equipment and pressure lines
- Coalescer and depth filter elements on compressor and turbine intakes
- Spherical roller bearings with contact seals for pumps and conveyors
- Stainless steel cup and wheel brushes for weld cleaning before inspection
Relevant products
Products for oil & gas
Filtration
Industrial Air Filters
- Element types
- Wire mesh, depth, adsorption, coalescer, separator, spin-on
- Wire Mesh Filters
- Depth Filters
- Adsorption Filters
- Coalescer Filters
Motion & Power Transmission
Industrial Bearings
- Types
- Deep groove ball, angular contact, spherical roller, tapered roller, needle, thrust
- Ball Bearings
- Roller Bearings
- Spherical Roller Bearings
- Tapered Roller Bearings
Surface Treatment
Abrasive Removal Brush Segments
- Fill material
- Abrasive nylon (SiC / ceramic), crimped steel, knotted steel, brass, Tampico
- Strip Brushes
- Cylinder Brushes
- Wheel Brushes
- Cup Brushes
Technical considerations
What we check before we quote
Heat shortens hose life
Sustained high ambient temperature hardens the inner tube. Specify a higher temperature rating and sleeve exposed runs.
Filtration grade pays for itself
Fine silica passes coarse elements readily. Upgrading the primary stage and adding a pre-filter is usually cheaper than the wear it prevents.
Supplying oil & gas?
Send your consumables list, a part number or a photo. We return an itemised quotation with lead times per line.